Chicago Brick Oven 750 DIY Hybrid Wood And Gas Fired Pizza Oven Kit

Chicago Brick Oven 750 DIY Hybrid Wood and Gas Fired Pizza Oven Kit

If you are looking for quick heating, the CBO-750 Hybrid DIY Pizza Oven Kit oven includes a two-burner gas system: an infrared burner under the hearth and an ambient burner at the back of the hearth.

You can also burn wood at the back or side of the oven to attain that smoky, wood-fired flavor for which Chicago Brick Ovens are famous. Chicago Brick Oven prefab outdoor pizza oven kits are certified to UL and NSF4 Standards. Inside and out, the CBO-750 Hybrid DIY Pizza Oven Kit includes everything you need for the easiest and fastest way to experience the high heat of our signature FlameRoll®.

Residential hybrid ovens are for outdoor use only. Hybrids are available in Natural Gas (NG) or Propane Gas (LP) and must be designated as NG or LP gas unit at time of order and shipped from factory complete because it cannot be retrofitted in the field.

Commercial Hybrid ovens are certified for indoor and outdoor commerical applications. Hybrids are available in Natural Gas (NG) or Propane Gas (LP) and must be designated as NG or LP gas unit at time of order and shipped from factory complete because it cannot be retrofitted in the field.

 

FEATURES

• Commercial grade refractory cement interior can hold heat in excess of 1000ºF
• Cook anything in this oven that you would on a grill or a conventional oven
• FlameRoll® technology generates high even temperatures, ensuring a perfect cook every time
• Made in the USA
• 6 Piece Oven Included (dome, 3-piece hearth, arch, door)
• 38″ x 28″ cooking surface
• Available in Natural Gas or Propane gas package
• Install kit includes anchor plate, insulating board & blanket, steel plate, and mortar
• Pizza peel, brush, and infrared thermometer gun included

SPECS

• Weight: 890 lbs
• Overall Dimensions: 35.5″ W × 30.25″ H × 42.75″ D
• Opening Dimensions: 17″ W x 11.8″ H
• CHIMNEY: this unit comes with a DuraTech 6″ Anchor Plate (Model #6DT-AP) that works with a Class A Stainless Steel DuraTech 6″ Double Wall Pipe (model #6DT-24SS to meet Standard HT103). You can buy this pipe from any building or hearth manufacturer.

 

A minimum 24-inch pipe section is required. If you are assembling your Chimney at 90,° you can add additional 24-inch sections as required. (The Chimney Pipe cannot have a total bend of more than 30.°) The taller the Flue Stack is, the further away the exhaust is from the cook!

 

Chicago Brick Oven 750 DIY Ready to Finish Hybrid Pizza Oven Downloads

Chicago Brick Oven 750 DIY Hybrid Pizza Oven Spec Sheet

Chicago Brick Oven Residential User Manual

Chicago Brick Oven Commercial User Manual