HPC Di Napoli Hybrid Gas/Wood Fueled Pizza Oven (Ready To Finish)

Ready to Finish Di Napoli Hybrid Gas/Wood Pizza Oven 

The HPC Di Napoli Pizza Oven is a built-in enclosed dual fuel oven with an electronic ignition that can be installed in a permanent structure with the use of a chimney. Design your own outer shell to fully personalize this pizza oven.

This oven comes assembled with the hearth, oven, enclosure and a chimney stack, arched front ready to be installed. A vent must be installed to take smoke away from oven – a 3ft Duratech vent pipe is included with alternate sizes available if needed.  Take advantage of HPC’s oven and electronic ignition for easy start ups and continuous controlled oven operation.

This ready to finish hybrid pizza oven kit is designed for installation into a non-combustible structure, which allows for you to create a custom built pizza oven that matches your patio design for significantly less cost than most on-site built ovens.

FEATURES

• Includes Oven, Stainless Steel Hearth, Ready To Finish Enclosure
• 3 ft length vent pipe included (other lengths available)
• End user customizes the finish
• Natural Gas or Liquid Propane fueled (can use wood additionally in both NG and LP configurations)
• 870 sq. in. cooking surface area
• Made In USA

 

SPECS

• Weight: 420 lbs
• Overall Dimensions: 33.25″ W × 24.375″ H × 44″ D
• Opening Dimensions: 18″ W x 11″ H
• Internal Cooking Dimensions: 29″ W x 22″ H x 30″ D
• 2″ insulation thickness
• Needs minimum 2″ clearance to combustibles

 

HPC Di Napoli Ready to Finish Pizza Oven Downloads

HPC Pizza Ovens Owner’s Manual

Di Napoli Pizza Oven Spec Sheet